An ADU structural engineer does more than stamp a set of drawings. On many projects the engineer, or an inspector working under the engineer's plan, also has to visit the site at set points in construction, and those visits carry their own fees and scheduling. Budget for both the design work and the field work before you sign a build contract, and ask your building department early which visits your project will need.

What an ADU structural engineer actually does

Most people meet the structural engineer as a line item on the design budget: calculations, a foundation plan, framing details, and a stamp on the permit set. That part matters. The engineer sizes footings to the soil, picks beam and header sizes, details how the walls resist wind and earthquake loads, and shows how the roof ties down to the walls and the walls to the foundation.

The part homeowners often miss is that the engineer's responsibility does not always end when the permit is issued. Depending on the design and the local rules, the engineer may need to:

  • Answer questions from the plan reviewer and revise calculations during permitting.
  • Respond to questions from the builder during construction (often called RFIs, or requests for information).
  • Review substitutions, such as a different beam product or a field change to a footing.
  • Visit the site to observe that key structural work matches the design.
  • Write a letter confirming that observed work is in general conformance with the drawings.

Each of those is real time for the engineer, and many engineering agreements price them separately from the drawings.

Engineer site visits vs. city inspections

Three kinds of field review can show up on an ADU, and they are easy to confuse.

City or county inspections. The building department's own inspectors check foundation, framing, rough-ins, insulation and final, in a fixed order. These are part of the permit and are usually covered by permit fees.

Structural observation. This is a visual review by the engineer or architect of record to confirm the structural system generally matches the approved design. As the trade publication STRUCTURE magazine explains, structural observation is not the same thing as inspection; it does not replace the city's inspections.

Special inspections. These are focused checks by a qualified special inspector on specific work, such as certain concrete, reinforcing steel, structural welding, high-strength bolting, or engineered anchors and hold-downs. Building codes based on the International Building Code list these in a dedicated chapter, and the engineer typically identifies which apply in a statement of special inspections on the plans.

Some local building departments publish guides on when they require these on homes and accessory buildings. One California county's technical bulletin, for example, explains when that department will require special inspection and structural observation on one- and two-family dwellings and residential accessory buildings. Requirements like these change based on jurisdiction, the adopted code edition and the structural design itself, so treat any single city's guide as an example, not a rule for your project.

When an ADU may need structural observation or special inspections

Many simple, conventionally framed ADUs never trigger special inspections. Others do. On the ADUs we build, the conditions that tend to bring an engineer back to the site are:

  • Engineered lateral systems. Shear walls with tight nailing schedules, hold-downs and straps, or steel moment frames. These are common in seismic and high-wind regions and around large window walls.
  • Unusual foundations. Deepened footings, grade beams, piers on sloped lots, or foundations designed around poor soils.
  • Concrete or epoxy anchors. Post-installed anchors into existing concrete, such as when an attached ADU ties into the house or a garage slab is reused.
  • Long spans and vaulted ceilings. Ridge beams, steel or engineered-lumber beams, and large openings.
  • Garage conversions. Checking whether an existing slab and footing can carry new loads may need an engineer's evaluation before design, and sometimes a visit during demolition.
  • Engineer-of-record requirements. Some engineers require their own observation at certain milestones as a condition of their design, even where the building department does not.

The building official can also require them on a case-by-case basis. The way to find out is to ask, early.

How to budget for ADU structural engineer site visits

There is no national price for engineering visits; fees vary by region, firm and how far the site is from the engineer's office. What you can control is making sure they are in the budget at all. Before you sign a contract, ask the engineer and the builder:

  1. Is construction-phase service included in the engineering fee? Many proposals cover drawings and plan-check responses only.
  2. How many site visits does the design call for, and at which milestones? Typical points are before a foundation pour, at framing and shear-wall nailing, and at any steel or anchor installation.
  3. How are extra visits billed? Hourly, per visit, or a fixed allowance. Ask what triggers an extra trip, such as a failed observation or a field change.
  4. Who hires and pays the special inspector? In some places the owner must hire the special inspector directly so they are independent of the builder. Confirm what your jurisdiction expects.
  5. Who answers builder questions during construction, and how fast? A slow answer to a framing question can stall a crew.
  6. What letters or reports are needed for final? Some departments will not sign off until they receive the engineer's or special inspector's final letter.

When you compare bids, check whether the builder's price assumes these costs are yours or theirs. A quote that leaves them out is not cheaper, just incomplete.

The complete guide · $129

The Age-in-Place ADU Guide

Design a home around the life your parent wants to keep, build it so it holds up as needs change, and pay no more than it should cost.

How site visits fit the build schedule

Engineer visits and special inspections usually have to happen before the work is covered up, just like city inspections. If concrete is about to be poured or drywall is about to go up, the observation has to happen first. That means:

  • The builder needs to schedule visits several days ahead, not the morning of.
  • A missed or failed observation can hold up the next inspection in the sequence.
  • Field changes, such as moving a window inside a shear wall, may need the engineer's written approval before the framing inspection.

On the ADUs we build, we put the engineer's milestones on the same schedule as the city inspections from the start, so everyone knows which day needs which person on site. Your builder should be able to show you a similar plan.

What an experienced builder recommends up front

  • Engage the structural engineer after feasibility, not after design is finished. Soil conditions, slope, existing slabs and tree roots all affect the foundation. Start with a free ADU lot check to see what your property may allow, then bring the engineer in while the layout can still change.
  • Get a soils report when the engineer asks for one. It is usually cheaper than over-designing a foundation to cover unknowns.
  • Read the general notes sheet. The structural plans often list required observations and special inspections in plain sight.
  • Put construction-phase engineering in the contract. List who pays for visits, special inspectors and final letters.
  • Keep a contingency for field questions. Existing conditions on remodels and conversions are where most engineering surprises appear.
  • Keep the documents straight. Make sure the drawings the engineer stamped are the same ones the builder is pricing and building. Our guide to site plans, surveys and permit drawings covers how those documents fit together.